Cowint Premium Double Matte Hot Peel DTF Film - For Roland BY-20 & BN-20D DTF Printers
Transform your garment decoration and textile printing with Cowint's premium DTF film, precisely sized for the Roland VersaSTUDIO BY-20 and BN-20D DTF printers. The Cowint advanced double matte coating technology delivers:
- Exceptional color vibrancy and depth
- Superior ink adhesion for lasting results
- Outstanding wash resistance
- Perfect transfers on both light and dark fabrics
- Excellent detail reproduction
- Enhanced flexibility and stretch properties
Whether you're running a small business or commercial print shop, this professional-grade DTF film ensures consistent, high-quality results with minimal waste. Each roll is manufactured to rigorous standards, guaranteeing that your designs maintain their integrity through repeated wear and washing.
Experience the perfect balance of quality and efficiency with Cowint Premium DTF Film – your reliable choice for professional garment decoration.
Specifications:
- Roll Width: 20 inches with an acceptable variance of +/- .25"
- Roll Length: 325 feet
- Peel Temperature: Hot
- Base Material: PET
- Surface: Double-sided matte coating
- Compatible with: All standard DTF printers and inks
Time: 5 -10 seconds
Pressure: Medium to High, even pressure
Peel: Hot - allow image to set 3-5 seconds then peel
Repress: 5-15 seconds using same temp
Apply hot peel adhesive powder evenly, remove excess powder before curing.
The below data is based on a 4-head DTF 60cm machine with 6 pass print speed. The speeds of other models should be adjusted according to their print speed.
- Print Bed Temp: aligns with DTF shaker settings. 70°C - 90°C
- Powder application speed: Normal for hot peel; for instant peel, increase shake speed to 6-8.
- Powder Curing Temp: 135°C - 140°C for 60 seconds
- Film Storage and use- humidity is the main concern, store and if possible print at 60% RH at a consistent room temp is best.
Note: Because of the wide variety of fabrics and garment manufacturers that exist, we highly recommend that this product be fully tested prior to going into production.
