ChromaFuse DTF Film is a high quality direct to film product offered exclusively by Specialty Graphics Supply. ChromaFuse can be used with most DTF printers and produces exceptional results at a great value. Once the printed design is heat pressed onto the garment, the film will release as a warm or cold peel for an easy and efficient work flow.
Try a FREE sample of ChromaFuse DTF Film before committing to a full roll. Limit one per customer.
Match ChromaFuse DTF film with the ChromaFuse DTF Powder for the best results.
Specifications:
- Roll size: 23.6" (60cm) wide x 328 feet (100m) in length
- Single-sided, matte coated
- For direct to film (DTF) printers only.
Materials
Cotton, polyester and cotton/poly blends
Temperature
50/50 Synthetic Blend or 100% Poly - 280°F
100% Cotton - 320°F
Note: If you have adhesion issues it is recommended to start trouble shooting by reducing the temperature and time.
Note: If you have adhesion issues it is recommended to start trouble shooting by reducing the temperature and time.
Time
6 - 10 seconds
Pressure
Light to Medium, even pressure (20 to 30# PSI)
Note: It is ideal to use a pressing pillow.
Note: It is ideal to use a pressing pillow.
Peel
Remove from press, rub transfer into garment then peel warm or cold.
Note: Peel design perpendicular to garment, DO NOT pull film up and away.
Important Notes:
Adjust time, temp and pressure as needed based on the textile/substrate.
Use higher temperature range for cotton and the lower temperature range for polyester and synthetic textiles.
A post press of approx. 10-15 seconds with parchment paper or another cotton or canvas textile to apply textured finish and improve adhesion, durability, and washability. To produce a glossy finish, use a PTFE non-stick sheet for the post press instead of the parchment paper.
Use higher temperature range for cotton and the lower temperature range for polyester and synthetic textiles.
A post press of approx. 10-15 seconds with parchment paper or another cotton or canvas textile to apply textured finish and improve adhesion, durability, and washability. To produce a glossy finish, use a PTFE non-stick sheet for the post press instead of the parchment paper.
Care
Machine wash warm with mild detergent. Dry at normal setting. No chlorine bleach.
Note: Because of the wide variety of fabrics and garment manufacturers that exist, we highly recommend that this product be fully tested prior to going into production.
