We offer Siser EasyWeed heat transfer vinyl by-the-foot in the 12" width for small jobs and crafts. The 12" width is perfect for all craft cutters on the market and can be used in all pro vinyl cutters as well. Our by-the-foot short rolls are the perfect choice when you need just a few feet or so to fill your customer's order. No need to buy a large roll of a unique color for a small job! Need several short rolls? We offer mix and match colors to reach the quantity discounts.
If you're new to Siser EasyWeed HTV, it features a sticky backing sheet which is great for small letters and details. It is also made of polyurethane so it's safe for children's clothing. If you have a laser cutter, it's great for that too as it's PVC free. Like the name says, it's super easy to cut, weed and apply. Don't have a heat press? No problem, you can use a hand iron also.
Siser EasyWeed 12" By-The-Foot Specifications:
- The actual roll with is 11.8" wide
- Thickness: 3.5 mils (3.5/1000")
- Limited stretchability
- Finish: semi-gloss except for the matte colors
- Applies to cotton, polyester, cotton/poly and cotton/poly/rayon blends
- Applies with a heat press or hand iron
- CPSIA certified so it's safe for children's apparel
- Short by-the-foot rolls are cut by hand and tubeless
Waste Reduction Policy: In order to help reduce landfill waste, orders for lengths under 15 feet may be filled in 2 sections for this item. If a split section will cause you an issue, please request "no split sections" in the order comments.
Siser EasyWeed Color Choices:
The colors samples provided here may not be exact representations of the vinyl colors. Various factors such as monitor resolution, color settings and display type can all effect how the colors are viewed on the Internet.
How to Apply Siser EasyWeed HTV
Can I Apply Siser EasyWeed to Moisture Wicking Materials?
This type of fabric is heat sensitive and the regular temperature setting may leave a heat/bounding box that will not fade. Siser EasyWeed can be applied at a temperature as low as 280°F but the press time will need to be increased. When testing, increase the press time in 5 second increments until good adhesion is achieved. Testing with a spare garment is highly recommended.
Note: Because of the wide variety of fabrics and garment manufacturers that exist, we highly recommend that this product be fully tested prior to going into production.
